The HeiDetect ValuCT is the low cost entry into the
world of industrial computed tomography. The system is
easy to handle and requires hardly any prior knowledge in CT
inspection.
|
HeiDetect ValuCT is a
complete CT system for non-destructive testing
of small and medium-sized plastic and aluminum
workpieces of different sizes and weights.
This all-in-one system consists of a radiation
shielded cabinet, a high performance X-ray tube
and a flat panel detector. |
By selecting between
two detectors of different dimensions, the CT
system made by Heitec PTS GmbH can be adapted
perfectly to your needs and workpiece sizes.
The lifting and rotating table is moved
automatically, while the workpieces are
positioned manually on the magnification axis.
Therefore it is possible to adjust the distance
between the focal point, the object and the
detector, depending on the test object.
The reconstruction software Volex and the
evaluation software Volume Player Plus are
proven and tested solutions developed by the
Fraunhofer Development Center for X-ray
Technology EZRT, which is the development
partner of Heitec PTS GmbH. |
|
Due to
its intuitive and simple user
interface, the Fraunhofer software
Volex allows for rapid scan results. |
|
CT scan of a plastic workpiece structure and composition |
CT scan of a cast aluminum workpiece detection of cavities and blowholes |
Data sheet HeiDetect ValuCT
|